A Novel Piezoelectrically Driven Miniature Proportional Pneumatic Control Valve Utilizing a Microfabricated Orifice Array

Nathan P. Hagstrom; Nebiyu Fikru; Alexander M. Hargus; Thomas R. Chase

doi:10.1109/TMECH.2019.2934405

A Novel Piezoelectrically Driven Miniature Proportional Pneumatic Control Valve Utilizing a Microfabricated Orifice Array

Nathan P. Hagstrom, Nebiyu Fikru, Alexander M. Hargus, Thomas R. Chase

Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

In this paper, we report a new valve architecture enabling the use of a piezostack actuator in miniature valves without the need for a motion amplifier. Normally, the small stroke length of the piezostack would reduce the flow capacity of the valve to a small fraction of the flow capacity of the valve orifice. The novel feature of the valve consists of replacing a single orifice with an array of micro-orifices having the same cumulative area, but each orifice having a diameter of four times the stroke length of the piezostack. The micro-orifice array enables achieving the full flow capacity of the equivalent single orifice while exploiting the low-power and high-speed capabilities of the piezostack. Using a piezostack, the open-loop linearity of proportional flow control is improved in comparison to an electromagnetically actuated valve. A prototype valve is characterized to assess the performance attributes possible with the valve architecture. The characterization of the first prototype revealed that it achieved similar flow rates to those of other miniature valves, all the while demonstrating a response time of 295 $\mu$s, and a steady-state power consumption of 41 μW.

Original language	English (US)
Article number	8792954
Pages (from-to)	1931-1941
Number of pages	11
Journal	IEEE/ASME Transactions on Mechatronics
Volume	24
Issue number	5
DOIs	https://doi.org/10.1109/TMECH.2019.2934405
State	Published - Oct 2019

Bibliographical note

Funding Information:
Manuscript received May 19, 2018; revised February 27, 2019 and May 31, 2019; accepted July 28, 2019. Date of publication August 9, 2019; date of current version October 15, 2019. Recommended by Technical Editor K. Oldham. This work was supported in part by the National Science Foundation under Grant EEC-0540834, in part by the National Fluid Power Association Education and Technology Foundation, and in part by the National Science Foundation through the National Nano Coordinated Infrastructure Network under Award ECCS-1542202. (Corresponding author: Nathan P. Hagstrom.) The authors are with the Department of Mechanical Engineering, University of Minnesota - Twin Cities, Minneapolis, MN 55414 USA (e-mail:,hagst082@umn.edu; fikru004@umn.edu; hargu030@umn.edu; trchase@umn.edu). Digital Object Identifier 10.1109/TMECH.2019.2934405

Publisher Copyright:
© 2019 IEEE.

Keywords

Fluid flow control
micromachining
piezoelectric devices
pneumatic systems
valves

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access

10.1109/TMECH.2019.2934405

OpenUrl availability

Full text

Cite this

@article{4a4ec478e231481e9f6e77be85d47e71,

title = "A Novel Piezoelectrically Driven Miniature Proportional Pneumatic Control Valve Utilizing a Microfabricated Orifice Array",

abstract = "In this paper, we report a new valve architecture enabling the use of a piezostack actuator in miniature valves without the need for a motion amplifier. Normally, the small stroke length of the piezostack would reduce the flow capacity of the valve to a small fraction of the flow capacity of the valve orifice. The novel feature of the valve consists of replacing a single orifice with an array of micro-orifices having the same cumulative area, but each orifice having a diameter of four times the stroke length of the piezostack. The micro-orifice array enables achieving the full flow capacity of the equivalent single orifice while exploiting the low-power and high-speed capabilities of the piezostack. Using a piezostack, the open-loop linearity of proportional flow control is improved in comparison to an electromagnetically actuated valve. A prototype valve is characterized to assess the performance attributes possible with the valve architecture. The characterization of the first prototype revealed that it achieved similar flow rates to those of other miniature valves, all the while demonstrating a response time of 295 $\mu$s, and a steady-state power consumption of 41 μW.",

keywords = "Fluid flow control, micromachining, piezoelectric devices, pneumatic systems, valves",

author = "Hagstrom, {Nathan P.} and Nebiyu Fikru and Hargus, {Alexander M.} and Chase, {Thomas R.}",

note = "Funding Information: Manuscript received May 19, 2018; revised February 27, 2019 and May 31, 2019; accepted July 28, 2019. Date of publication August 9, 2019; date of current version October 15, 2019. Recommended by Technical Editor K. Oldham. This work was supported in part by the National Science Foundation under Grant EEC-0540834, in part by the National Fluid Power Association Education and Technology Foundation, and in part by the National Science Foundation through the National Nano Coordinated Infrastructure Network under Award ECCS-1542202. (Corresponding author: Nathan P. Hagstrom.) The authors are with the Department of Mechanical Engineering, University of Minnesota - Twin Cities, Minneapolis, MN 55414 USA (e-mail:,hagst082@umn.edu; fikru004@umn.edu; hargu030@umn.edu; trchase@umn.edu). Digital Object Identifier 10.1109/TMECH.2019.2934405 Publisher Copyright: {\textcopyright} 2019 IEEE.",

year = "2019",

month = oct,

doi = "10.1109/TMECH.2019.2934405",

language = "English (US)",

volume = "24",

pages = "1931--1941",

journal = "IEEE/ASME Transactions on Mechatronics",

issn = "1083-4435",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "5",

}

TY - JOUR

T1 - A Novel Piezoelectrically Driven Miniature Proportional Pneumatic Control Valve Utilizing a Microfabricated Orifice Array

AU - Hagstrom, Nathan P.

AU - Fikru, Nebiyu

AU - Hargus, Alexander M.

AU - Chase, Thomas R.

N1 - Funding Information: Manuscript received May 19, 2018; revised February 27, 2019 and May 31, 2019; accepted July 28, 2019. Date of publication August 9, 2019; date of current version October 15, 2019. Recommended by Technical Editor K. Oldham. This work was supported in part by the National Science Foundation under Grant EEC-0540834, in part by the National Fluid Power Association Education and Technology Foundation, and in part by the National Science Foundation through the National Nano Coordinated Infrastructure Network under Award ECCS-1542202. (Corresponding author: Nathan P. Hagstrom.) The authors are with the Department of Mechanical Engineering, University of Minnesota - Twin Cities, Minneapolis, MN 55414 USA (e-mail:,hagst082@umn.edu; fikru004@umn.edu; hargu030@umn.edu; trchase@umn.edu). Digital Object Identifier 10.1109/TMECH.2019.2934405 Publisher Copyright: © 2019 IEEE.

PY - 2019/10

Y1 - 2019/10

N2 - In this paper, we report a new valve architecture enabling the use of a piezostack actuator in miniature valves without the need for a motion amplifier. Normally, the small stroke length of the piezostack would reduce the flow capacity of the valve to a small fraction of the flow capacity of the valve orifice. The novel feature of the valve consists of replacing a single orifice with an array of micro-orifices having the same cumulative area, but each orifice having a diameter of four times the stroke length of the piezostack. The micro-orifice array enables achieving the full flow capacity of the equivalent single orifice while exploiting the low-power and high-speed capabilities of the piezostack. Using a piezostack, the open-loop linearity of proportional flow control is improved in comparison to an electromagnetically actuated valve. A prototype valve is characterized to assess the performance attributes possible with the valve architecture. The characterization of the first prototype revealed that it achieved similar flow rates to those of other miniature valves, all the while demonstrating a response time of 295 $\mu$s, and a steady-state power consumption of 41 μW.

AB - In this paper, we report a new valve architecture enabling the use of a piezostack actuator in miniature valves without the need for a motion amplifier. Normally, the small stroke length of the piezostack would reduce the flow capacity of the valve to a small fraction of the flow capacity of the valve orifice. The novel feature of the valve consists of replacing a single orifice with an array of micro-orifices having the same cumulative area, but each orifice having a diameter of four times the stroke length of the piezostack. The micro-orifice array enables achieving the full flow capacity of the equivalent single orifice while exploiting the low-power and high-speed capabilities of the piezostack. Using a piezostack, the open-loop linearity of proportional flow control is improved in comparison to an electromagnetically actuated valve. A prototype valve is characterized to assess the performance attributes possible with the valve architecture. The characterization of the first prototype revealed that it achieved similar flow rates to those of other miniature valves, all the while demonstrating a response time of 295 $\mu$s, and a steady-state power consumption of 41 μW.

KW - Fluid flow control

KW - micromachining

KW - piezoelectric devices

KW - pneumatic systems

KW - valves

UR - http://www.scopus.com/inward/record.url?scp=85074274492&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85074274492&partnerID=8YFLogxK

U2 - 10.1109/TMECH.2019.2934405

DO - 10.1109/TMECH.2019.2934405

M3 - Article

AN - SCOPUS:85074274492

SN - 1083-4435

VL - 24

SP - 1931

EP - 1941

JO - IEEE/ASME Transactions on Mechatronics

JF - IEEE/ASME Transactions on Mechatronics

IS - 5

M1 - 8792954

ER -

A Novel Piezoelectrically Driven Miniature Proportional Pneumatic Control Valve Utilizing a Microfabricated Orifice Array

Abstract

Bibliographical note

Keywords

UN SDGs

Access

OpenUrl availability

Other files and links

Fingerprint

Cite this