Adaptive XTCR, AGC, and Adaptive DFE Loop

Taehyoun Oh, Ramesh Harjani

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

The hardware performance of an ISI equalizer and XTC is dependent on the adaptive calibration algorithm used for the XTC combined with the AGC and the DFE. In this paper we describe an automatic calibration algorithm that focuses on high-speed crosstalk cancellation and crosstalk reutilization techniques for single-end I/Os [1]. The crosstalk signal between channels in multiple lanes strongly depends on the channel spacing of the PCB lanes and proximity issues caused by pads and bond wires. Recently developed low-power crosstalk cancellation and crosstalk reutilization schemes are able to achieve high signal integrity even in severe crosstalk environments, where previously, the data eye openings might have been completely closed [1]. The power-efficient adaptive techniques described here are intended for use with the hardware circuits and techniques described in a previous study [1].

Original languageEnglish (US)
Title of host publicationAnalog Circuits and Signal Processing
PublisherSpringer
Pages47-67
Number of pages21
DOIs
StatePublished - 2014

Publication series

NameAnalog Circuits and Signal Processing
ISSN (Print)1872-082X
ISSN (Electronic)2197-1854

Bibliographical note

Publisher Copyright:
© 2014, Springer Science+Business Media New York.

Keywords

  • Charge Pump
  • Insertion Loss
  • Little Mean Square
  • Little Mean Square Algorithm
  • Pulse Response

Fingerprint Dive into the research topics of 'Adaptive XTCR, AGC, and Adaptive DFE Loop'. Together they form a unique fingerprint.

Cite this