Block copolymer based pressure sensitive adhesives modified with PPO for increased service temperatures

Rong Ming Ho, David W. Giles, Christopher W. Macosko, Frank S. Bates

Research output: Contribution to journalArticlepeer-review

3 Scopus citations

Abstract

Higher service temperature pressure sensitive adhesives were formulated from poly(styrene-b-isoprene-b-styrene) (SIS) block copolymer blended with low molecular weight midblock and endblock associating resins. The aliphatic midblock resin was WingTack 95 and the aromatic endblock resin was a polyphenylene ether, PPO. In even small amounts (< 3%) the PPO raised the service temperature of the adhesive, as measured by elevated temperature holding power (lap shear) tests. The formulations were also examined with transmission electron microscopy (TEM), small angle X-ray scattering (SAXS), dynamic mechanical analysis (DMA), and 180° peel strength tests. A tentative ternary phase diagram for SIS/WingTack 95/PPO was constructed and a basic understanding of structure/property relationships for this PSA system was accomplished. The large improvements in the elevated temperature holding power tests correlated with increases in the polystyrene microphase glass transition and order-disorder transition.

Original languageEnglish (US)
Pages (from-to)65-85
Number of pages21
JournalJournal of Adhesion
Volume73
Issue number1
DOIs
StatePublished - 2000

Bibliographical note

Funding Information:
This work was supported by the Center for Interfacial Engineering, an NSF-supported Engineering Research Center at the University of Minnesota, by the Minnesota Department of Transportation, and by the National Science Council of Taiwan (NSC 87-22 18-E-005-024). The assistance of Mark Johnson, Dui Bui and Joseph Huang with the measurements is gratefully acknowledged.

Fingerprint

Dive into the research topics of 'Block copolymer based pressure sensitive adhesives modified with PPO for increased service temperatures'. Together they form a unique fingerprint.

Cite this