Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates

Stanley G. Burns; Robert J. Weber

doi:10.1109/MWSCAS.1991.252038

Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates

Stanley G. Burns, Robert J. Weber

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

We report on the use of sputter-deposited, thin-film, aluminum nitride resonators as the feedback element in hybrid single-mode, combline, and voltage-controlled UHF and L-band oscillators. The resonators have also been cointegrated on the same substrate with 2 GHz BJTs. Design techniques and suggestions for novel architectures using this technology are presented.

Original language	English (US)
Title of host publication	1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	307-310
Number of pages	4
ISBN (Electronic)	0780306201
DOIs	https://doi.org/10.1109/MWSCAS.1991.252038
State	Published - 1991
Externally published	Yes
Event	34th Midwest Symposium on Circuits and Systems, MWSCAS 1991 - Monterey, United States Duration: May 14 1992 → May 17 1992

Publication series

Name	Midwest Symposium on Circuits and Systems
ISSN (Print)	1548-3746

Conference

Conference	34th Midwest Symposium on Circuits and Systems, MWSCAS 1991
Country/Territory	United States
City	Monterey
Period	5/14/92 → 5/17/92

Bibliographical note

Funding Information:
This work has been supported primarily by the Iowa Department of Economic Development, Education and Research Development Program, and the Department of Electrical Engineering and Computer Engineering at Iowa State University. The work was conducted at the Iowa State University Microelectronics Research Center.

Publisher Copyright:
© 1992 IEEE.

Access

10.1109/MWSCAS.1991.252038

OpenUrl availability

Full text

Cite this

Burns, S. G., & Weber, R. J. (1991). Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates. In 1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991 (pp. 307-310). Article 252038 (Midwest Symposium on Circuits and Systems). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/MWSCAS.1991.252038

Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates. / Burns, Stanley G.; Weber, Robert J.
1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991. Institute of Electrical and Electronics Engineers Inc., 1991. p. 307-310 252038 (Midwest Symposium on Circuits and Systems).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Burns, SG & Weber, RJ 1991, Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates. in 1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991., 252038, Midwest Symposium on Circuits and Systems, Institute of Electrical and Electronics Engineers Inc., pp. 307-310, 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991, Monterey, United States, 5/14/92. https://doi.org/10.1109/MWSCAS.1991.252038

Burns SG, Weber RJ. Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates. In 1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991. Institute of Electrical and Electronics Engineers Inc. 1991. p. 307-310. 252038. (Midwest Symposium on Circuits and Systems). doi: 10.1109/MWSCAS.1991.252038

@inproceedings{59d5bb8a20af4bc2a9325be8564640dd,

title = "Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates",

abstract = "We report on the use of sputter-deposited, thin-film, aluminum nitride resonators as the feedback element in hybrid single-mode, combline, and voltage-controlled UHF and L-band oscillators. The resonators have also been cointegrated on the same substrate with 2 GHz BJTs. Design techniques and suggestions for novel architectures using this technology are presented.",

author = "Burns, {Stanley G.} and Weber, {Robert J.}",

note = "Funding Information: This work has been supported primarily by the Iowa Department of Economic Development, Education and Research Development Program, and the Department of Electrical Engineering and Computer Engineering at Iowa State University. The work was conducted at the Iowa State University Microelectronics Research Center. Publisher Copyright: {\textcopyright} 1992 IEEE.; 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991 ; Conference date: 14-05-1992 Through 17-05-1992",

year = "1991",

doi = "10.1109/MWSCAS.1991.252038",

language = "English (US)",

series = "Midwest Symposium on Circuits and Systems",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "307--310",

booktitle = "1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991",

}

TY - GEN

T1 - Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates

AU - Burns, Stanley G.

AU - Weber, Robert J.

N1 - Funding Information: This work has been supported primarily by the Iowa Department of Economic Development, Education and Research Development Program, and the Department of Electrical Engineering and Computer Engineering at Iowa State University. The work was conducted at the Iowa State University Microelectronics Research Center. Publisher Copyright: © 1992 IEEE.

PY - 1991

Y1 - 1991

N2 - We report on the use of sputter-deposited, thin-film, aluminum nitride resonators as the feedback element in hybrid single-mode, combline, and voltage-controlled UHF and L-band oscillators. The resonators have also been cointegrated on the same substrate with 2 GHz BJTs. Design techniques and suggestions for novel architectures using this technology are presented.

AB - We report on the use of sputter-deposited, thin-film, aluminum nitride resonators as the feedback element in hybrid single-mode, combline, and voltage-controlled UHF and L-band oscillators. The resonators have also been cointegrated on the same substrate with 2 GHz BJTs. Design techniques and suggestions for novel architectures using this technology are presented.

UR - http://www.scopus.com/inward/record.url?scp=85067554457&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85067554457&partnerID=8YFLogxK

U2 - 10.1109/MWSCAS.1991.252038

DO - 10.1109/MWSCAS.1991.252038

M3 - Conference contribution

AN - SCOPUS:85067554457

T3 - Midwest Symposium on Circuits and Systems

SP - 307

EP - 310

BT - 1991 Proceedings of the 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 34th Midwest Symposium on Circuits and Systems, MWSCAS 1991

Y2 - 14 May 1992 through 17 May 1992

ER -

Design and performance of UHF and L-band oscillators using thin-film resonators on semiconductor substrates

Abstract

Publication series

Conference

Bibliographical note

Access

OpenUrl availability

Other files and links

Fingerprint

Cite this