Direction cosine matrix estimation with an inertial measurement unit

Yan Wang, Rajesh Rajamani

Research output: Contribution to journalArticlepeer-review

3 Scopus citations

Abstract

Estimating attitude using an inexpensive MEMS inertial measurement unit has many applications in smart phones, wearable sensors, rehabilitation medicine and robots. Traditional approaches to attitude estimation from the aerospace world focus on the use of either Euler angles or quaternions. These approaches suffer from disadvantages including singularities and nonlinear models. This paper proposes a method to estimate the direction cosine matrix (DCM) which encapsulates attitude information, instead of Euler angles or quaternions. The DCM does not suffer from singularities and also has linear dynamics. A rigorous DCM estimation algorithm, that incorporates automatic magnetometer bias calibration and satisfaction of an inherent orthonormal property of the DCM, is developed. The validity of the developed algorithm is demonstrated through experimental results with estimation of attitude on a 5-DOF robot. The estimation results are compared with values computed from encoders on the robot as well as with results from previously published algorithms.

Original languageEnglish (US)
Pages (from-to)268-284
Number of pages17
JournalMechanical Systems and Signal Processing
Volume109
DOIs
StatePublished - Sep 1 2018

Bibliographical note

Funding Information:
This work was supported in part by funding from the US National Science Foundation under Grant CMMI 1562006 .

Publisher Copyright:
© 2018 Elsevier Ltd

Keywords

  • Attitude estimation
  • Direction cosine matrix
  • Euler angles
  • Kalman filter

Fingerprint

Dive into the research topics of 'Direction cosine matrix estimation with an inertial measurement unit'. Together they form a unique fingerprint.

Cite this