The vast number of turbine cascade studies in the literature has been performed in straight-endwall, high-aspect-ratio, linear cascades. As a result, there has been little appreciation for the role of, and added complexity imposed by, reduced aspect ratios. There also has been little documentation of endwall profiling at these reduced spans. To examine the role of these factors on cascade hydrodynamics, a largescale nozzle guide vane simulator was constructed at the Heat Transfer Laboratory of the University of Minnesota. This cascade is comprised of three airfoils between one contoured and one flat endwall. The geometries of the airfoils and endwalls, as well as the experimental conditions in the simulator, are representative of those in commercial operation. Measurements with hot-wire anemometry were taken to characterize the flow approaching the cascade. These measurements show that the flow field in this cascade is highly elliptic and influenced by pressure gradients that are established within the cascade. Exit flow field measurements with triple-sensor anemometry and pressure measurements within the cascade indicate that the acceleration imposed by endwall contouring and airfoil turning is able to suppress the size and strength of key secondary flow features. In addition, the flow field near the contoured endwall differs significantly from that adjacent to the straight endwall.
|Original language||English (US)|
|Title of host publication||Heat Transfer; Electric Power; Industrial and Cogeneration|
|Publisher||American Society of Mechanical Engineers (ASME)|
|ISBN (Electronic)||9780791878569, 9780791878569|
|State||Published - 2000|
|Event||ASME Turbo Expo 2000: Power for Land, Sea, and Air, GT 2000 - Munich, Germany|
Duration: May 8 2000 → May 11 2000
|Name||Proceedings of the ASME Turbo Expo|
|Other||ASME Turbo Expo 2000: Power for Land, Sea, and Air, GT 2000|
|Period||5/8/00 → 5/11/00|
Bibliographical notePublisher Copyright:
Copyright © 2000 by ASME.