Multi-Block large-eddy simulations of turbulent boundary layers

Andrea Pascarelli, Ugo Piomelli, Graham V. Candler

Research output: Contribution to journalArticlepeer-review

Abstract

Time-developing turbulent boundary layers over an isothermal flat plate at free-stream Mach numbers of 0.3 and 0.7 are computed using an explicit finite-difference method on structured multi-block grids. The size of each block is adjusted depending on the dimension of the largest structures present locally in the flow. This alleviates the cost of calculations in which the wall layer is resolved, and may result in substantial savings of memory and CPU time, if several layers are used. In the calculations presented the near-wall region is computed using a domain with a spanwise length Lo+ = 820, which is sufficient to contain several streaks. This grid block is repeated periodically in the spanwise direction. The outer layer, which contains larger structures, is computed using a domain that is twice as wide (Lo+ = 1640). Although the flow at the interface between the blocks has a periodicity length determined by the inner-layer block, within a few grid points longer wavelengths are generated. The velocity statistics and rms intensities compare well with single-block calculations that use substantially more grid points.

Original languageEnglish (US)
Pages (from-to)256-279
Number of pages24
JournalJournal of Computational Physics
Volume157
Issue number1
DOIs
StatePublished - 2000

Bibliographical note

Funding Information:
The authors thank the referees for their insightful comments. They are particularly indebted to one referee, who corrected the overly optimistic cost estimates originally presented by the authors. They also gratefully acknowledge the support from the Air Force Office of Scientific Research, under Grants AF/F49620-97-1-0244 (A.P. and U.P.) and AF/F49620-98-1-0035 (G.V.C), monitored by Dr. L. Sakell. Computer time was provided by the University of Minnesota Supercomputing Institute.

Cite this