Sampling of carbon fiber aerosols

B. Y.H. Liu, D. Y.H. Pui, X. Q. Wang, C. W. Lewis

Research output: Contribution to journalArticlepeer-review

17 Scopus citations

Abstract

This paper describes theoretical and experimental studies undertaken in connection with the problem of sampling carbon fiber aerosols in an ambient environment. Calculations indicate that carbon fiber aerosols with an 8-μm fiber diameter and a density of 1.8 g/cm3 can be sampled by a sampler designed to collect particles in the 10–30–μm aerodynamic diameter range if fibers up to a few millimeters in length are to be collected. An approach is then described in which carbon fiber aerosols are collected in the impactor of the inlet of a dichotomous sampler. Experimental data are presented showing that the impaction characteristics of the carbon fiber aerosol can be predicted with a reasonable degree of accuracy by approximating the shape of the fibers by a prolate ellipsoid.

Original languageEnglish (US)
Pages (from-to)499-511
Number of pages13
JournalAerosol Science and Technology
Volume2
Issue number4
DOIs
StatePublished - 1983

Bibliographical note

Funding Information:
Although the research described in this article was funded wholly or in part by the U.S. Environmental Protection Agency through cooperative agreement No. CR-808491 to the University of Minnesota, it has not been subjected to Agency review and therefore does not necessarily reflect the views of the Agency, and no official endorsement should be inferred.

Fingerprint

Dive into the research topics of 'Sampling of carbon fiber aerosols'. Together they form a unique fingerprint.

Cite this