Synthesis and nonvolatile memory characteristics of thermally, dimensionally and chemically stable polyimides

Samdae Park, Kyungtae Kim, Jin Chul Kim, Wonsang Kwon, Dong Min Kim, Moonhor Ree

Research output: Contribution to journalArticlepeer-review

47 Scopus citations

Abstract

A series of soluble poly(amic acid) precursors were prepared from a new carbzole-containing monomer, 3,3′-bis[9-carbazole(ethyloxy)biphenyl]-4, 4′-diamine (HAB-CBZ) by polycondensation with four different aromatic dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′- biphenyltetracarboxylic dianhydride (BPDA), 3,3′,4,4′- diphenylethertetracarboxylic dianhydride (ODPA), and 3,3′,4,4′- diphenylsulfonyltetracarboxylic dianhydride (DSDA). From the precursors, nanoscale thin films of polyimides (PIs) were prepared by spin-coating and subsequent thermal imidization. All the PIs exhibited excellent thermal and dimensional stability. In particular, the PIs based on the PMDA and BPDA units revealed excellent chemical resistance to organic solvents, in addition to the high thermal and dimensional stability, which are required for the fabrication of high performance memory devices in three-dimensionally multi-stack structure. Devices fabricated with nanoscale thin PI films exhibited excellent unipolar write-once-read-many-times (WORM) memory behavior with a high ON/OFF current ratio of up to 1010. The active PI films were found to operate at 2.2-3.3 V, depending on the chemical structures. This study found that the imide rings as local charge trap sites are necessary to enhance the memory performance in addition to carbazole moiety. All the results collectively indicate that the thermally, dimensionally and chemically stable PIs of this study are a promising material for the mass production at low cost of high performance, programmable nonvolatile WORM memory devices that can be operated with low power consumption in unipolar switching mode.

Original languageEnglish (US)
Pages (from-to)2170-2179
Number of pages10
JournalPolymer
Volume52
Issue number10
DOIs
StatePublished - May 4 2011

Bibliographical note

Funding Information:
This study was supported by the National Research Foundation (NRF) of Korea of the Ministry of Education, Science & Technology (MEST) (Center for Electro-Photo Behaviors in Advanced Molecular Systems) and the MEST (BK21 Program and World Class University Program).

Keywords

  • Electrically nonvolatile memory
  • Insoluble polyimide
  • Nanoscale thin film

Fingerprint

Dive into the research topics of 'Synthesis and nonvolatile memory characteristics of thermally, dimensionally and chemically stable polyimides'. Together they form a unique fingerprint.

Cite this