Thermocouple design for measuring temperatures of small insects

A.A. Hanson, R.C. Venette

Research output: Contribution to journalArticlepeer-review

15 Scopus citations


Contact thermocouples often are used to measure surface body temperature changes of insects during cold exposure. However, small temperature changes of minute insects can be difficult to detect, particularly during the measurement of supercooling points. We developed two thermocouple designs, which use 0.51 mm diameter or 0.127 mm diameter copper-constantan wires, to improve our ability to resolve insect exotherms. We tested the designs with adults from three parasitoid species: Tetrastichus planipennisi, Spathius agrili, and S. floridanus. These species are <3 mm long and <0.1 mg. Mean exotherms were greater for fine-gauge thermocouples than thick-gauge thermocouples for the smallest species tested, T. planipennisi. This difference was not apparent for larger species S. agrili and S. floridanus. Thermocouple design did not affect the mean supercooling point for any of the species. The cradle thermocouple design developed with the fine gauge wire was reusable and allowed for easy insect recovery after cold exposure.
Original languageEnglish (US)
Pages (from-to)261-266
Issue number3
StatePublished - 2013

Fingerprint Dive into the research topics of 'Thermocouple design for measuring temperatures of small insects'. Together they form a unique fingerprint.

Cite this