@inproceedings{90cb48079ab343728974e223006a3025,
title = "The effects of thermo-electrically induced convection in alloy solidification",
abstract = "The effects of a constant uniform magnetic field on thermoelectric currents during dendritic solidification were investigated using a 2-dimensional enthalpy based numerical model. Using an approximation of the dendrite growing in free space it was found that the resulting Lorentz force generates a circulating flow influencing the solidification pattern. As the magnetic field strength increases it was found that secondary growth on the clockwise side of the primary arm of the dendrite was encouraged, while the anticlockwise side is suppressed due to a reduction in local free energy. The preferred direction of growth rotated in the clockwise sense under an anti-clockwise flow for both the binary alloy and pure material. The tip velocity is significantly increased compared to growth in stagnant flow. This is due to a small recirculation that follows the tip of the dendrite; bringing in colder liquid and lower concentrations of solute. The recirculation being not normally incident on the tip is most likely the cause for the rotation. Grain growth consisting of multiple seeds with the same anisotropy growing in the same plane, gives a competition to release latent heat resulting in stunted growth. The initial growth for each dendrite is very similar to the single seed cases indicating that dendrites must become close before the thermoelectric interactions are significant.",
keywords = "Binaryalloy, Dendritic-growth, Enthalpy, MHD, Thermoelectricity, Undercooling",
author = "A. Kao and K. Pericleous and M. Patel and V. Voller",
year = "2008",
language = "English (US)",
isbn = "9781905088249",
series = "Proceedings of the 6th International Conference on Engineering Computational Technology",
booktitle = "Proceedings of the 6th International Conference on Engineering Computational Technology",
note = "6th International Conference on Engineering Computational Technology, ECT 2008 ; Conference date: 02-09-2008 Through 05-09-2008",
}