Theoretical and experimental evaluation of a mixing-type bipolar charger using corona-discharge at high pressure

Shigeru Kimoto, Kiyoko Mizota, Motoaki Adachi

Research output: Contribution to journalArticlepeer-review

Abstract

A Mixing-type Bipolar Charger using Corona-discharge at High Pressure (MBCCHP) is subjected to both theoretical and experimental evaluation. In theoretical studies, the charging model for the MBCCHP is developed to determine the influences of the residence time tR, the number ratio of negative ions to positive ions N- /N+, and the number ratio of particles to bipolar ions n0/NB (where NB=N++N-) on the charge distribution. The charge distribution recorded experimentally at various values of n0 /NB and N-/N+ is compared with theoretical results. The comparisons indicate that the theoretical results can be used to adequately explain well the experimental data. Both sets of results demonstrate that the MBCCHP is capable of generating equilibrium charge distributions of aerosol particles within errors of 10%. The diameter of the particles ranges between 10-500 nm and the particle number concentration n0 is less than 3.0 × 1012m-3 under operating conditions of 0.5>tR> 0.1 s, with a frequency >100 Hz, a voltage of 9.0 kV0-P, and a high-pressure ionizer operating at 0.4MPa.

Original languageEnglish (US)
Pages (from-to)533-545
Number of pages13
JournalJournal of Chemical Engineering of Japan
Volume44
Issue number8
DOIs
StatePublished - 2011
Externally publishedYes

Keywords

  • Bipolar charging
  • Calculation
  • Charge distribution
  • Mixing-type
  • Nanoparticles

Fingerprint

Dive into the research topics of 'Theoretical and experimental evaluation of a mixing-type bipolar charger using corona-discharge at high pressure'. Together they form a unique fingerprint.

Cite this